ASSA ABLOY

ES8100 V-Lock

The unique and popular Lockwood/Trimec ES8000 V-Lock has been completely redesigned and engineered to produce the new ASSA ABLOY ES8100 V-Lock. 

Designed and assembled in Australia, with patents pending in various countries, the ES8100 incorporates many improvements over its Lockwood/Trimec predecessor, the ES8000, including a higher preload rating of 100kg, Door Position Monitoring, integrated LED lock status and diagnostics visual indication, increased door misalignment correction from 7mm to 12mm, an IP53 rating for external door applications and simple, one-step, PTO/PTL onsite configuration.

Although completely redesigned internally, the new ES8100 V-Lock body and faceplate retains the original footprint and is a direct retrofit to the original ES8000 model. The ES8100 strike plate utilises the same fixing locations but is 3mm wider to increase misalignment distance.

The ES8100, also known as the V-lock, contains a high torque motorised bolt which moves into a V shaped Strike Plate, pulling the door into alignment, when locked. The ES8100 may be mounted either vertically or horizontally but cannot be mounted in the floor.

The ES8100 V-Lock can be mortice mounted and concealed from view or surface mounted, with the inclusion of an optional kit. A slim design with classic satin stainless steel faceplate, makes the ES8100 a product with great aesthetic appearance and easy installation.

Features:

  • Unlocks under a Pre-Load of up to 100kg in 3-wire mode, 15kg in 2-wire mode
  • Locks under a Pre-Load of 20kg (12W) and 35kg (24W)
  • 1000kg Holding Force
  • IP53 rated for external door applications
  • Door Position and Lock Status Monitoring
  • On-Board visual Lock Status indication and diagnostics LED
  • Easy, one-step, Fail Safe (PTL) and Fail Secure (PTO) field selection
  • Optional Surface / Glass mount Kit
  • May be mounted vertically or horizontally (must not be mounted in the floor)
  • Allows for door misalignment of up to 12mm total (+/-6mm)
  • Operating voltage: 11.4 - 26VDC
  • Durability tested to 500,000 cycles (120N unlocking, 50N locking)

Applications:

  • Single and Double Swing hinge Doors
  • Doors subject to Side Load (Pre-Load)
  • Misaligned doors
  • Glass doors
  • Suitable for use with Access Control, Intercom, Keypad and Card Reader Systems and doors requiring door position monitoring
    • Voltage: 11.4 - 26VDC
    • Current: Peak Current: 1000mA, Idle Current: 35mA @12VDC with LED activated
    • Unlocking Pre-Load: Side Load rated: Motorised unlocking - 100kg max at the bolt
    • Strength: Maximum 1000kg
    • Monitoring: Lock Status Monitoring: NO/NC, Door Position Monitoring: NC
    • Unlocking Time: 1 Second under Preload
    • Locking Time: 3 Seconds
    • Environment: Weather resistant construction to IP53
    • Operating Temperature:  -10 to +60 Degrees Celsius
    • Endurance: 500,000 operations (120N Unlocking, 50N Locking)
    • Dimensions: Body: 210L x 24W x 42D (mm), Faceplate: 256L x 30W (mm), Strike Plate: 256L x 30W (mm)
    • Construction: Stainless Steel lock body, Face plate and Strike Plate

    Specification Statement:

    The lock must be a high torque motorised bolt with pre-load tolerance, capable of unlocking with up to 100kg of side pressure (Pre-Load) and Locking up to 35kg Pre-Load. The lock must have a minimum IP Rating of IP53, include integrated lock status and diagnostics LED indication, lock status and door position monitoring and be site configurable for Fail Safe (PTL) or Fail Secure (PTO) operation. The lock shall accept an operating voltage between 11.4 to 26VDC and draw no more than 1000mA during change of state and 35mA when idle.

    The strike plate must be shaped in a V format to accommodate up to 12mm (total) for misaligned doors. The lock must be triggered with a magnet positioned in the strike plate and be monitored for locked, unlocked and door position.

    Dimensions:

     

    Standards and Compliance:

    • S8 (Security) Australian Lock Standard (AS4145.2.2008)
    • D8 (Durability) Australian Lock Standard (AS4145.2.2008)
    • IP53 Rating
  • ES8100 V-Lock Datasheet(PDF, 778 KB)
    ES8100 V-Lock Installation Guide and User Manual(PDF, 2 MB)
    ES8100 V-Lock FAQs(PDF, 1 MB)
  • DescriptionPart numberBar code
    ASSA ABLOY ES8100 V-Lock, 11.4 -26VDC, Fail Safe, Full MonitoringES81009348313051267
    ES8100 V-Lock Glass Door Housing (Includes Dress Plate & Fixing Tape)208000-0009311847929074
    ES8100 V-Lock Strike Plate with Magnet208100-0039348313051328
    ES8100 Retrofit Strike Plate. Replaces ES8000 Strike Plate when upgrading to the ES8100.208100-004

ASSA ABLOY ES8100 V-Lock

Similar products

  • ES6000 Series Hook Lock

    The ES6000 surface mounted Hook Lock has been designed with the architect in mind. The ES6000 has a cast aluminium cover that can be supplied in a wide variety of colours to match existing door frames.

    The lock is suitable for swinging doors, sliding doors and is easily attached to wood or steel door frames. On a standard 2040mm door frame this low profile lock complies with the minimum headroom requirement as stipulated in the Building Code of Australia.

    With its high preload (side load) capability (up to 300kg), high holding force (700kg), and 4 hour fire rating, the ES6000 Hook Lock is ideal for fire door applications and anywhere a high security surface mount solution is required.

    Features

    • Power to open or power to lock versions available
    • Side load (pre-load) capable operates freely with up to 300kgs of side pressure.
    • Self latching will self latch without power for fire applications.
    • 700kg holding force
    • Robust construction stainless steel components used.
    • Low profile will protrude only 40mm into door headroom.
    • Multi voltage automatic selection 12 to 30 volts DC with back EMF protection and reverse polarity protection.
    • Multi orientation can be mounted vertically or horizontally
    • Low current consumption
    • 12VDC- 250mA after 1 sec. (initial current 830mA)
    • 24VDC- 140mA after 1 sec. (initial current 530mA)
    • Comprehensive monitoring options

  • Trimec ES8200 Technilock

    Originally designed and manufactured in Switzerland by an ASSA ABLOY Group company the TECHNILOCK has been sold in Europe for over 10 years now. Capable of opening under 70kg of preload and with a total holding force of over 2500kg this lock has been used in Custodial, Treasury, Jewellery and Psychiatric applications all across Europe.

    In short this product provides a lower cost alternative to the MT112 custodial strike which requires the additional cost of a mortice lock.

    The TECHNILOCK in contrast is an all-encompassing solution as it has built-in key-override removing the need for an additional lock thus providing a lower cost alternative to the MT112 for custodial and other High Security applications.

    Features

    • SIDE LOAD - PRE LOAD CAPABLE Bolt will release with up to 70kg of side pressure - ideal for use on doors with seals or doors that are subjected to high wind load or air-conditioning pressures.
    • EXTREME HOLDING FORCE Will withstand more than 2500kgs. The test rig manufactured to test the bolt broke at 2500kg so the bolt will withstand more than this.
    • POWER TO LOCK OR POWER TO OPEN (must be specified) PTL or PTO versions available on request. The bolt is not interchangeable in the field and configuration must be specified when ordering.
    • HIGH SPEED OPERATION Locks in less than 1 second.
    • MULTIPLE ORIENTATION Can be mounted Horizontally or Vertically.
    • COMPREHENSIVE MONITORING Bolt Locked, Door Closed, Optional Key-Override monitoring.

  • Lockwood Padde Series TB25 Drop Bolt

    The TB25 drop bolt represent true engineering innovation, design excellence and the superior quality customers have come to expect and demand from Lockwood. Designed for use on swing-through, double action doors, these drop bolts are ideal for applications where an electric strike is impractical.

    Features

    • High Security. Bolt is deadlocked in the extended position
    • Bolt position monitored
    • Door position monitor with integrated magnet into the strike plate (no need to install a separate reed switch)
    • Multiple Orientation, drop bolts will work horizontally or vertically
    • Power to Lock/ Power to Open
    • Continuously Rated Solenoid
    • Tamper Proof. Lock cannot be defeated by slipping a metal object between lock and striker plate
    • Intelligent Electronics. These intelligent bolts will attempt to re-close the bolt 8 times, allowing time for swing through doors to settle in the closed position
    • Thermal Protection. In the event of solenoid overheat, a thermal fuse will operate, eliminating any fire risk

    Applications

    • Misaligned doors
    • Timber Doors

    Standards and Compliance

    • British Standard BSEN 50081-1 & BSEN 50082-1
    • CE Approved
    • C-tick Certified

  • Trimec ES8200 Technilock

    Originally designed and manufactured in Switzerland by an ASSA ABLOY Group company the TECHNILOCK has been sold in Europe for over 10 years now. Capable of opening under 70kg of preload and with a total holding force of over 2500kg this lock has been used in Custodial, Treasury, Jewellery and Psychiatric applications all across Europe.

    In short this product provides a lower cost alternative to the MT112 custodial strike which requires the additional cost of a mortice lock.

    The TECHNILOCK in contrast is an all-encompassing solution as it has built-in key-override removing the need for an additional lock thus providing a lower cost alternative to the MT112 for custodial and other High Security applications.

    Features

    • SIDE LOAD - PRE LOAD CAPABLE Bolt will release with up to 70kg of side pressure - ideal for use on doors with seals or doors that are subjected to high wind load or air-conditioning pressures.
    • EXTREME HOLDING FORCE Will withstand more than 2500kgs. The test rig manufactured to test the bolt broke at 2500kg so the bolt will withstand more than this.
    • POWER TO LOCK OR POWER TO OPEN (must be specified) PTL or PTO versions available on request. The bolt is not interchangeable in the field and configuration must be specified when ordering.
    • HIGH SPEED OPERATION Locks in less than 1 second.
    • MULTIPLE ORIENTATION Can be mounted Horizontally or Vertically.
    • COMPREHENSIVE MONITORING Bolt Locked, Door Closed, Optional Key-Override monitoring.

Contact us
Experience a safer and more open world