Trimec ES110 Series Electric Strikes
The ES110 is a cost efficient robust electric strike with a solid construction of one-piece cast aluminium body and stainless steel striker. Having a deeper than normal strike-keeper area, ES110 is designed to work with an extensive range of locks and offers the same level of security and reliability usually provided by more expensive electric locking solutions.
Extension lips are available to accommodate the installation of electric strikes on door frames with different thickness. The ES110 product range of patented electric strikes are suitable for use with all access control installations where flexibility, security and lower cost are required.
Key Features
- All models IP56 Weather resistant
- Fail safe/fail secure changeable on site
- Stainless steel striker for extra strength and durability
- Stainless steel locking pins
- Multi Voltage 12Vdc & 24Vdc
- Optional mounting kit
- Installation template
- Suitable For 18mm latch with a 3mm door gap
- TRICARE® 5 Year Warranty
Applications
- Exposed areas
- High traffic areas
- Open in/open out doors
- Suitable for use with all access control systems
Standards and Compliance
- Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1.2005 (Part 1: Fire resistant door sets)
- Approved to UL1034 (highest level)
- CE Approved
- C-Tick Certified
- Weather Resistant (IP56)
Trimec ES100 Series Electric Strikes
Voltage
12Vdc & 24VdcCurrent
250 mA @ 12Vdc - 125mA @ 24VdcSolenoid
Solenoids are rated for continuous use.Monitoring
NoneHolding Force
680 kg Static Strength RatingEndurance
Cycle tested to 1,000,000 operationsEnvironment
Operational temperature range -20°C to + 60°C
Weather resistant construction Standard. (IP56)Body
Cast Aluminium ConstructionKeeper
Stainless Steel
Latch
Suitable for 18mm latchbolt with 3mm door gap
Specification Statement
Where Power to Lock and Power to Open functions may be required in the same building, the strike must be interchangeable from either "Power to Lock" or "Power to Open" on site. The electric strike should not consume current greater than 250 mA @ 12Vdc - 125mA @ 24Vdc and have a solenoid suitable for continuous use. Certifications must include CE, C-tick and 4hr fire rating. The strike should have a minimum holding force of 680kg, and an endurance rating of 1 million cycles.