ASSA ABLOY

Lockwood 184 Offset Pull Handle

Made from brass and designed to compliment 1800 and 2800 Series Brass Plate Furniture, the 184 Offset Pull provides a fixed pull without impacting the cylinder/turn functionality or the design aesthetic of a plate furniture installation.

Application
Designed for use with the Lockwood Synergy Series Mortice Locks and Lockwood 1800 or 2800 Series Brass Plate Furniture.

Lockwood 184 Offset Pull Handle

4d912-184.jpg4d912-184.jpg

  • Fixing
    The 184 Pull is designed with 147.5mm screw centres to enable it to be fixed through a standard visible fix brass plate (1900 or 2900). Plates are to be ordered separately to the 184 and care should be taken to ensure that a visible fix plate is specified for both sides of the door.

    Finishes

    Satin Chrome Brushed SC

    Dimensions
    Length: 163.5mm
    Diameter: 16mm
    Projection: 61mm
    Screw Centres: 147.5mm
    Finger Clearance: 45mm

  • Lockwood Push and Pull Door Furniture Catalogue(PDF, 2 MB)

Similar products

  • Lockwood 194 Series Round End Push and Pull Plates

    Pull handle door furniture for use in public, commercial and industrial buildings.

    Features of the 194 Series Round End Push and Pull Plates

    • Brass construction.
    • Supplied completely assembled with handles. (if applicable)
    • "PUSH" or "PULL" engraving available in 16mm high lettering.
    • Plates are designed to fit back to back. If outside plate is concealed fixed then inside plate must be visible fixed. Both plates can be specified as visible fixed.

  • Lockwood 206/207 Series Push and Pull Plates

    The 206/207 Series Door Furniture are 2mm thick stainless steel plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.

    Application
    Designed for use with 3570 Series Mortice Locks.

  • Lockwood 208/209 Series Push and Pull Plates

    The 208/209 Series Door Furniture are 2mm thick stainless steel or brass plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.

    Application
    Designed for use with 3570 Series Mortice Locks.

  • Lockwood 214/215 Series 10mm Radius Corner Push and Pull Plates

    The 214 Series Door Furniture is 300 x 100 x 2mm thick stainless steel or brass plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.

    Application
    Designed for use with 3570 Series Mortice Locks.

  • Lockwood 216/217 Series 10mm Radius Corner Push and Pull Plates

    The 216 Series Door Furniture is 300 x 65 x 2mm thick stainless steel or brass plate with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.

    Application
    Designed for use with 3570 Series Mortice Locks and on Push and Pull doors.

  • Lockwood 218/219 Series 10mm Radius Corner Push and Pull Plates

    The 218 Series Door Furniture is 250 x 50 x 2mm thick stainless steel or brass with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.

    Application
    Designed for use with 3570 Series Mortice Locks and on Push and Pull doors.

Contact us
Experience a safer and more open world