326 Knob outside access device | ASSA ABLOY

Similar products

293 & 293A Push pad bolt
Exidor emergency push pad shoot bolt for single doors, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the pad down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door.
Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.
296 Panic latch
Exidor single-point locking panic latch, designed for use with single and double door applications. The unit is operated by pushing the bar down into the door face to retract the latch, releasing the bar returns the latch to the rest position. The push bar design can be easily cut to size to suit different door widths and can be fitted with a lever or knob outside access device. Certified in compliance with EN 1125 with suitability for timber doors up to FD120 and FD120/FD240 metal doors. Indicate the required finish when ordering.
284 & 284A Rebated double doorset
Exidor panic set comprising of two single panic bolt units for use on plain meeting stile double doorsets. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door.
284A is supplied with adjustable shoot bolts for greater onsite flexibility. The push bar design can be easily cut to size to suit different door widths and is suited to most general-purpose non-rebated double door applications, often found in industrial applications.
Certified in compliance with EN 1125 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.
285 & 285A Rebated Double Doorset
Exidor double doorset for rebated double doors featuring a single point panic latch and two point panic bolt, supplied with either timber or metal door keeps and fixings. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door. The push bar design can be easily cut to size to suit different door widths. 285A supplied with adjustable shoot bolts for greater onsite flexibility. Certified in compliance to EN 1125 with suitability for use on timber doors up to FD120 as well as metal doors FD120/FD240. Available in SIL or SSE finishes (other finishes available upon request). Indicate required finish when ordering.
285 & 285A Rebated double doorset
Exidor double doorset for rebated double doors featuring a single-point panic latch and two-point panic bolt, supplied with either timber or metal door keeps and fixings. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door. The push bar design can be easily cut to size to suit different door widths. 285A is supplied with adjustable shoot bolts for greater onsite flexibility. Certified in compliance with EN 1125 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.
293 & 293A Push pad bolt
Exidor emergency push pad shoot bolt for single doors, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the pad down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door.
Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.
294 & 294A Panic bolt
Exidor panic bolt with two-point vertical locking shoot bolts is an economical and versatile solution for many public area buildings. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door. Supplied with either timber or steel door keeps and fixings and adjustable shoot bolts for greater onsite flexibility (294A only). Certified in compliance with EN 1125 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.
296 Panic latch
Exidor single-point locking panic latch, designed for use with single and double door applications. The unit is operated by pushing the bar down into the door face to retract the latch, releasing the bar returns the latch to the rest position. The push bar design can be easily cut to size to suit different door widths and can be fitted with a lever or knob outside access device. Certified in compliance with EN 1125 with suitability for timber doors up to FD120 and FD120/FD240 metal doors. Indicate the required finish when ordering.
297 Push pad latch
Exidor emergency push pad latch that is simple to install, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the pad down into the door face to retract the latch, releasing the pad returns the latch to the rest position.
Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240.
Indicate the required finish when ordering.
302 Knob outside access device
Exidor round knob outside access device for use with 200 series and 300 series hardware, for gaining entry through an escape door. The unit is operated by rotating the knob to retract the internal bolts/latches, releasing the knob returns the internal bolts/latches to the rest position. Available with or without Euro/Oval cylinder. Key retention option available (Suffix order code with “RK” for key retention). Locking the cylinder prevents access into the building but will not prevent escape from the building. Certified as an approved accessory to 200/300 series hardware as part of EN 1125 and EN 179. Certifire approval when used as an accessory to the 200/300 series range. Indicate the required finish when ordering (plated finishes are not recommended for external use). Additional fixings for thicker doors are available on request.
305 Mortice panic latch
Exidor panic mortice actuator with cylinder mortice night latch, designed for use with single and double-door applications. Ideal for low-traffic doors in public areas requiring key entry only. The unit is operated by pushing the bar down into the door face to retract the latch, releasing the bar returns the latch to the rest position. Supplied with either timber or steel door keeps and fixing and certified in compliance with EN 1125. Indicate the required finish when ordering.
306 Push pad mortice actuator with cylinder nightlatch
Exidor emergency push pad with a mortice night latch, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the pad down into the door face to retract the mortice lock latch, releasing the pad returns the mortice lock latch to the rest position.
Ideal for restricted access areas requiring key entry as a mortice lock offers more protection against abuse on the internal face. Certified in compliance with EN 179. Indicate the required finish when ordering.
307 Push pad emergency horiz pullman
Exidor push pad emergency horizontal Pullman latch that is simple to install, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the pad down into the door face to retract the latch bolts, releasing the pad returns the latch bolts to the rest position. Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.
Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.
308 Push bar panic horiz pullman
Exidor push bar panic horizontal Pullman latch that is simple to install, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the pad down into the door face to retract the latch bolts, releasing the pad returns the latch bolts to the rest position.
Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.
Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.
309 Rebated double doorset panic pullman
Exidor rebated double panic doorset comprising horizontal Pullman and vertical Pullman latches operated by push bar that is simple to install, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the bar down into the door face to retract the latch bolts, releasing the bar returns the latch bolts to the rest position.
Standard-size panic bolts are suitable for single doors up to 1220mm wide and 2440mm high (special sizes are available on request). Certified in compliance to EN 1125 with suitability for use on timber doors up to FD120 as well as metal doors FD120/FD240.
Indicate required finish when ordering.
310 Push pad emergency vertical pullman
Exidor push pad emergency vertical Pullman latch that is simple to install, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the pad down into the door face to retract the latch bolts, releasing the pad returns the latch bolts to the rest position.
Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.
Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240.
Indicate the required finish when ordering.
311 Push bar panic vertical pullman
Exidor push bar panic vertical Pullman latch that is simple to install, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the pad down into the door face to retract the latch bolts, releasing the pad returns the latch bolts to the rest position.
Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.
Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240.
Indicate the required finish when ordering.
316 Non-rebated double doorset
Exidor 2-off push bar panic vertical Pullman latches for non-rebated double doorsets that is simple to install, and supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the bar down into the door face to retract the latch bolts, releasing the bar returns the latch bolts to the rest position. Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.
Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.
316 Non-rebated double doorset vertical pullman
Exidor 2-off push bar panic vertical Pullman latches for non-rebated double doorsets that is simple to install, and supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the bar down into the door face to retract the latch bolts, releasing the bar returns the latch bolts to the rest position.
Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.
Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.
317 Rebated double doorset latch & vertical pullman
Exidor push bar panic bar set for rebated double doors comprising lath unit for active leaves and vertical Pullman latch for inactive leaves that is simple to install, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the bar down into the door face to retract the latch bolts, releasing the bar returns the latch bolts to the rest position.
Standard size panic bolts are suitable for single doors up to 1220mm wide and 2440mm high (special sizes are available on request).
Certified in compliance to EN 1125 with suitability for use on timber doors up to FD120 as well as metal doors FD120/FD240. Indicate required finish when ordering.
322 Lever outside access device
Exidor easy and convenient lever outside access device for use with 200 series and 300 series hardware, for gaining entry through an escape door. The unit is operated by pushing the lever down to retract the internal bolts/latches, releasing the lever returns the internal bolts/latches to the rest position. Available with or without a Euro cylinder. Locking the cylinder prevents access into the building but will not prevent escape from the building. Certified as an approved accessory to 200/300 series hardware as part of EN 1125 and EN 179. Certifire approval when used as an accessory to the 200/300 series range. Indicate the required finish when ordering (plated finishes are not recommended for external use). Additional fixings for thicker doors are available on request.
325 Lever outside access device
Exidor easy and convenient lever outside access device for use with 200 series and 300 series hardware, for gaining entry through an escape door. The unit is operated by pushing the lever down to retract the internal bolts/latches, releasing the lever returns the internal bolts/latches to the rest position. Available with or without a Euro cylinder. Key retention model available (Suffix order code with “RK” for key retention). Locking the cylinder prevents access into the building but will not prevent escape from the building. Certified as an approved accessory to 200/300 series hardware as part of EN 1125 and EN 179. Indicate the required finish when ordering (plated finishes are not recommended for external use). Additional fixings for thicker doors are available on request.
Exisafe CE851 panic bolt
The Exisafe CE851 panic bolt is a surface-mounted push bar for use on single doors or as part of a double-door solution. It is ideal for final exit escape doors that are used by the general public. The push bar can be cut to size on site to fit each door and is compatible with the knob and lever CE855OAD devices. It is tested to EN 1125 and up to FD120 on timber doors and FD240 on metal doors.
Exisafe CE852 rebated double door set
The Exisafe CE852 push bar is a surface-mounted panic set for use on rebated double doors, designed with a panic bolt to secure the secondary leaf and panic latch for easy opening.It is an ideal solution for final exit escape doors used by the general public. The Exisafe rebated double door set is compatible with the CE855OAD devices.It is tested to EN 1125 and up to FD120 on timber doors and FD240 on metal doors.
Exisafe CE853 panic latch
The Exisafe CE853 panic latch is for use in buildings that are accessed by the public, its push bar can be cut to size on site to fit it to each door and downward pressure on the bar withdraws the latch ensuring the immediate release of the door. It has universal handing and can be used on outward-opening single doorsets. It is tested to EN 1125 and up to FD120 on timber doors and FD240 on metal doors.
Exisafe CE854 emergency latch device
The Exisafe CE854 push pad latch is suitable for outward opening single doorsets, where areas are not accessed by the public and all users are familiar with building safety exit routes. It has been designed with a small and compact push pad and is the ideal emergency exit solution. It is tested to EN 179 and up to FD120 on timber doors and FD240 on metal doors.
Exisafe knob outside access device
ExiSAFE round knob outside access device for use with 200 series and 300 series hardware, for gaining entry through an escape door. The unit is operated by rotating the knob to retract the internal bolts/latches, releasing the knob returns the internal bolts/latches to the rest position. Available with or without a Euro cylinder. Key retention option available (Suffix order code with “RK” for key retention). Locking the cylinder prevents access into the building but will not prevent escape from the building. Certified as an approved accessory to the ExiSAFE range as part of EN 1125 and EN 179. Certifire approval when used as an accessory to the ExiSAFE range. Indicate the required finish when ordering (plated finishes are not recommended for external use). Additional fixings for thicker doors are available on request.
Exisafe CE858 emergency device
The Exisafe CE858 push pad surface-mounted emergency bolt device is for use on single doors or as part of a double-door solution.
It's ideal for final exit escape doors where all users are familiar with the building and hardware. The push pad is for install to the push face of outward opening doors with the design of the push pad being discrete for a tidier option.
It offers an automatic top trip that releases the bolts only as the door closes into the frame, preventing damage to the frame and flooring. The top and bottom shoot bolt rods can be cut to size on-site to fit each door.
It is tested to EN 179 and up to FD120 on timber doors and FD240 on metal doors.
Exisafe knob outside access device
ExiSAFE round knob outside access device for use with 200 series and 300 series hardware, for gaining entry through an escape door. The unit is operated by rotating the knob to retract the internal bolts/latches, releasing the knob returns the internal bolts/latches to the rest position.
Available with or without a Euro cylinder. Key retention option available (Suffix order code with “RK” for key retention). Locking the cylinder prevents access into the building but will not prevent escape from the building.
Certified as an approved accessory to the ExiSAFE range as part of EN 1125 and EN 179. Certifire approval when used as an accessory to the ExiSAFE range.
Indicate the required finish when ordering (plated finishes are not recommended for external use). Additional fixings for thicker doors are available on request.

Enquiries