702B/30 Push bar with 2 point locking

Exidor high-security three-point locking panic push bar set for rebated double doors. Ideal for large-capacity public venues such as sports arenas, where greater intruder resistance must balance the need for high-traffic evacuation.

Combines both 701B/30 and 702B/30 into a single set suitable for rebated double doors (central shoot bolt unit on active leaf, bolt unit on inactive leaf). The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on the closing of the door.

Certified in compliance with EN 1125 and suitable for use on FD30/FD60 timber doors and FD120/FD240 metal doors. 

Indicate the required finish when ordering. Microswitch option available - suffix order code with “MS” for microswitch.

Exidor high security one point locking panic push bar with central shoot bolt. Ideal for warehouse or commercial property, where greater intruder resistance is required. Supplied with timber or steel door keeps and fixings, alternative keeps are also available on request.

The unit is operated by pushing the bar down into the door face to retract the shoot bolt, the upper rod mechanism keeps the bolt retracted until automatically released on the closing of the door.

Certified in compliance with EN 1125 and suitable for use on FD30/FD60 timber doors and FD120/FD240 metal doors.  Microswitch option available - suffix order code with “MS” for microswitch.

Exidor high-security two-point locking lever-operated emergency unit with shoot bolts. Non-handed, it is Ideal for limited access warehouse or commercial property, where greater intruder resistance is required.

The unit is operated by pushing down on the lever handle to retract the bolts, the bolts remain retracted until automatically released on the closing of the door.

Certified in compliance with EN 179 and suitable for use on FD30/FD60 timber doors and FD120/FD240 metal doors. 

Indicate the required finish when ordering.

Exidor high-security three-point locking lever-operated emergency unit with shoot bolts. Three-point locking mechanism with vertical and central shoot bolts. Ideal for limited access areas in secure buildings such as banks, where greater intruder resistance is required.

The unit is operated by pushing down on the lever handle to retract the bolts, the bolts remain retracted until automatically released on the closing of the door.

Certified in compliance with EN 179 and suitable for use on FD30/FD60 timber doors and FD120/FD240 metal doors. Tested and approved to LPS 1175. 

Indicate the required finish when ordering.

Exidor high-security four-point locking panic push bar with shoot bolts. Ideal for warehouse or commercial property, where greater intruder resistance is required.

Supplied with timber or steel door keeps and fixings, alternative keeps are also available on request. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on the closing of the door.

Certified in compliance with EN 1125 and suitable for use on FD30/FD60 timber doors and FD120/FD240 metal doors. Tested and approved to LPS 1175.

Indicate the required finish when ordering. Microswitch option available - suffix order code with “MS” for microswitch.

Exidor high-security four-point locking lever-operated emergency unit with shoot bolts. Four-point locking on a single door with locking points on all 4 edges of the door for additional security.

Ideal for restricted access areas within sports and concert venues, where greater intruder resistance is required. The unit is operated by pushing down on the lever handle to retract the bolts, the bolts remain retracted until automatically released on the closing of the door.

Certified in compliance with EN 179 and suitable for use on FD30/FD60 timber doors and FD120/FD240 metal doors. Tested and approved to LPS 1175.

Indicate the required finish when ordering.

Exidor knob operated outside access device for the external opening of an escape door, suitable for occasionally used additional entry points such as building side entrances.

The compact design of external hardware for use with all 700 series hardware. The unit is operated by rotating the knob to retract the internal bolts, releasing the knob returns the internal bolts to the rest position.

Available with or without a Euro cylinder, incorporates cylinder protection to prevent manipulation. Locking the cylinder prevents access into the building but will not prevent escape from the building.

Certified as an approved accessory to the 700 series hardware as part of EN 1125 and EN 179. Certifire approval when used as an accessory to the 700 series range.

 Indicate the required finish when ordering. Additional fixings for thicker doors are available on request.

Exidor easy and convenient lever-operated outside access device for the external opening of an escape door. Suitable for use on busy additional entry points such as car parks or smoking area access doors.

The unit is operated by pushing the lever down to retract the internal bolts, releasing the lever returns the internal bolts to the rest position. Available with or without a Euro cylinder, incorporates cylinder protection to prevent manipulation. Locking the cylinder prevents access into the building but will not prevent escape from the building.

Certified as an approved accessory to the 700 series hardware as part of EN 1125 and EN 179. Certifire approval when used as an accessory to the 700 series range. Tested to LPS 1175 SR2 grade. Lever design helps meet the requirements of BS 8300 and Approved Document M, giving barrier-free access.

 Indicate the required finish when ordering. Additional fixings for thicker doors are available on request.

Exidor high-security lever-operated outside access device for the external opening of an escape door, ideal for additional entry points such as car park or smoking area access doors.

Principle attack areas are protected with high-security features and manufactured from stainless steel to help prevent force and drill attacks.

The unit is operated by pushing the lever down to retract the internal bolts/latches, releasing the lever returns the internal bolts/latches to the rest position. Available with or without a Euro cylinder. Locking the cylinder prevents access into the building but will not prevent escape from the building.

Certified as an approved accessory to the 700 series hardware as part of EN 1125 and EN 179. Tested to LPS 1175 SR4 grade. Lever design helps meet the requirements of BS 8300 and Approved Document M, giving barrier-free access.

Indicate the required finish when ordering. Additional fixings for thicker doors are available on request.

Exidor high security four-point locking panic push bar set for rebated double doors. Combines a unit with 2 horizontal shoot bolts and 702B/30 into a single set suitable for rebated double doors (2 horizontal shoot bolt unit on active leaf, bolt unit on inactive leaf).

Ideal for large-capacity public venues such as concert or exhibition halls, where greater intruder resistance must balance the need for high-traffic evacuation. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on the closing of the door.

Certified in compliance with EN 1125 and suitable for use on FD30/FD60 timber doors and FD120/FD240 metal doors. Available in SSS or AGR finishes (other finishes available upon request). Indicate the required finish when ordering. Microswitch option available - suffix order code with “MS” for microswitch.

Exidor high-security five-point locking panic push bar set for rebated double doors. Combines a unit with 3 horizontal shoot bolts and 702B/30 into a single set suitable for rebated double doors.

Ideal for large-capacity venues such as factories, where greater intruder resistance must balance the need for high-traffic evacuation. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door.

Certified in compliance with EN 1125 and suitable for use on FD30/FD60 timber doors and FD120/FD240 metal doors. Tested and approved to LPS 1175. 

Indicate the required finish when ordering. Microswitch option available - suffix order code with “MS” for microswitch.