• ASSA ABLOY door closer with Cam-Motion® technology; extended mounting plate and integrated latch bolt, guide rail with integrated effeff escape door strike 332®, 24V DC

    • Closing force continuously adjustable, EN size 3-6
    • Door closer approved in line with EN 1154, with CE mark
    • Escape door strike tested in compliance with the guideline for electrical locking systems for doors along escape routes
    • Closing speed, latching speed and backcheck continuously adjustable
    • Suitable for fire and smoke protection doors
    • Recommended door width: at least 850 mm - max. 1200 mm
    • Latch position continuously adjustable between 12 mm and 17 mm
    • Latch position adjustable horizontally between -3 mm and +6 mm
    • Latch bolt can be adjusted vertically in 4 mm increments (-4/ 0/ +4/ +8)
    • Escape door strike using FaFix®, adjustable by 2 mm
    • Suitable for left and right handed doors
    • Standard installation on hinge side

    Characteristics: 

    • Integrated escape door strike 332 in extended guide rail
    • Integrated latch bolt lock 807 on extended mounting plate 
    • With 4m connecting cable
    • Flush or surface installation of wiring possible
    • Suitable for fire and smoke protection doors
    • Suitable for left and right-handed doors
    • Standard installation on hinge side
    • Adjustable closing force
    • Closing  speed, latching speed and back-check continuously adjustable
    • Thermodynamic valves for consistent performance
    • Door closer axis height continuously adjustable by 14mm
    • Standard colours: Silver EV1

    Characteristics of escape door locking system:

    • Holding force of 2000 N
    • Latch position continuously adjustable between 12 mm and 17 mm
    • Latch position adjustable horizontally between -3 mm and +6 mm
    • Latch bolt can be adjusted vertically in 4 mm increments (-4/ 0/ +4/ +8)
    • Escape door strike using FaFix®, adjustable by 2 mm (0.5 mm steps)

    Characteristics of guide rail:

    • Height-adjustable by 2 mm for tolerance
    • Concealed fastening screws

    Colour:

    • Silver EV1
    • Stainless steel

    Accessories:

    • 5 mm Spacer Plate (narrow rebate) DCFA01
    • 15 mm Spacer Plate (wide rebate) DCFA02
    • Replacement plate, 5 mm, for Drilling Template DCFA03
    • Replacement plate, 15 mm, for External Drilling Template DCFA04
    • Mounting / replacement plate, 5 mm, for Narrow Frame DCFA05
    • Mounting / replacement plate, 15 mm, for Narrow Frame DCFA06
    • Mechanical opening damper A188
  • NameValue
    Closing forceEN 3-6
    Door width up to850 - 1200 mm
    Suitable for fire doorsYes
    HandingLeft / right handed
    Mounting methodStandard installation on hinge side
    Closing speedVariable between 170°-15°
    Latching speedVariable between 15°-0°
    Operating temperature range-15 °C to +40 °C
    BackcheckVariable above 75°
    Max. door opening angle hinge sideca. 170°
    Weight8.2 kg
    Dimension body727 x 66 x 66 mm
    Dimension guide rail727 x 30 x 43.5 mm
    Certified in compliance withEN 1154
    CE marking for building productsYes
    Escape door strike
    Holding force2000 N
    Rated voltage12 V DC / 24 V DC
    Rated current190 mA / 12 V; 95 mA / 24 V
    Rated operational voltage tolerance+/- 10 %
    Anchor contactYes
    Certified in compliance withEltVTR
    Approved system in compliance with EltVTREscape route controller

Ready to get the information you want? Fill out our form now!